| Variable | Value |
|---|
| Edit count of user (user_editcount) | 6 |
| Name of user account (user_name) | Kongerkinl2 |
| Time email address was confirmed (user_emailconfirm) | |
| Age of user account (user_age) | 14516597 |
| Groups (including implicit) user is in (user_groups) | *
user
|
| Page ID (article_articleid) | 0 |
| Page namespace (article_namespace) | 2 |
| Page title (without namespace) (article_text) | Kongerkinl2 |
| Full page title (article_prefixedtext) | User:Kongerkinl2 |
| Edit protection level of the page (article_restrictions_edit) | |
| Move protection level of the page (article_restrictions_move) | |
| Last ten users to contribute to the page (article_recent_contributors) | |
| Action (action) | edit |
| Edit summary/reason (summary) | Related articles |
| Whether or not the edit is marked as minor (minor_edit) | |
| Old page wikitext, before the edit (old_wikitext) | |
| New page wikitext, after the edit (new_wikitext) | <br> ,[http://www.ralph-laurendanmark.com ralph lauren]<tr> <td> <pre> <br> using acoustic emission condition monitoring of gearbox <br> </pre> </td> </tr> <br> <tr> <td> <pre > <br> emission occurs in the corresponding frequency of the output shaft fixed intervals,[http://www.abercrombiehamburg-fitch.com abercrombie hamburg]. Speed of 5s,[http://www.edhardyespana-es.net/para-mujer-ed-hardy-jerseys-mujer-tops-c-1_40.html ed hardy], the signal duration in the 15 ~ 25ms {speed between the 10s,[http://www.hollisterhamburg-de.org hollister hamburg], the duration between the 12 ~ 19ms,[http://www.ralph-laurendanmark.com ralph lauren outlet]. Duration of the delay due to tooth after impact,[http://www.mulberry-outletvaskor.net mulberry sverige], the leading surface and behind the gear face and ask when a certain vibration,[http://www.mulberry-outletkobenhavn.net/mulberry-outlet-c-7.html mulberry københavn]. This increased vibration in the case of backlash will be extended. In short,[http://www.hollister-milano.org hollister milano], the failure mode of failure and integrated so that the acoustic emission signals measured over the duration of tooth no longer wear. The reason may be that there is no tooth wear involute,[http://www.abercrombiedusseldorf-de.com abercrombie düsseldorf]. Tooth gap and because of worn tooth material increases, which increases the air with the teeth the same way as affecting acoustic emission,[http://www.abercrombiemunchende.net abercrombie münchen], [4 . Reliably detect a variety of brass and internal and external wall cracks, holes, pits, pits, uneven thickness defects and wear and tear ducts. Detection rate of 25 ~ 4Sin/rain, test piece diameter of 50 ~ 200ram, detection sensitivity is not inferior to the outer wall 10 wall thickness, <a href=, wall thickness of the wall is not inferior to 12.5, detection of wall thickness error of ± 0.08ram. System is particularly suitable for pipe production line quality monitoring, analysis, archiving and statistics. References 1 where secondary cloud. Conical cap Zhirong. Principle of magnetic flux leakage testing. Hefei University of Technology (Natural Science worn), 1994,3 (1) ,28-322FriedrichForster. NewresultsofNDTbytheMFLmethod. NDTI Ⅱ ternatio groan 1.1971,4 (4) i254-2593 ZHAO Kai-hua and so on. Electromagnetism. Version 2. Beijing; Higher Education Press, 1985. Receiving end date :1998 -05-25 (on the next 513 pages) should be based on equipment, film and intensifying screen choose the appropriate tube voltage and high exposure to transillumination. To get in line with blackness and image quality into account the technical requirements of the exposure sensitivity curve, and thus to select the exposure standard. 4 qualified negative of the conditions (1) No rinse and operation as well as pseudo-caused defects in the film itself, <a href=(2) marking and labeling is complete, as the quality indicator display correctly. (3) the effective assessment of the weld area should be in black-degree 1. O ~ 4.0. (4) image quality into account the sensitivity and image quality levels and the corresponding wall thickness. 5 Conclusion In recent years, the author studies and practical experience shows that the RT method in accordance with the above requirements of the implementation process and to detect cracks, incomplete penetration, slag and porosity defects image (image is distorted) in the film can be identified, only because the thickness of the base metal poor and the detection sensitivity is not very high. RT methods in view of the successful application of our plant, so trying this method as recommended RT T-fillet welds for quality review of the basic means. This article describes the implementation of the process according to its requirements, combined with the specific circumstances of our factory, we drafted a corporate standard WCGJ040601-94 ~ T-fuel boiler-ray weld inspection standards Board reviewed and get approved, <a href=Received Date: 1998 an O2-10 · 521 · <br> </pre> </td> </tr> <br><br>Related articles:<br> <ul><br> <br> <li> <a href=li><br> <br> <li> <a href=> </li><br> <br> <li> <a href = </Ul>
Related articles：
<ul>
<li><a href="http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12" target="_blank">the lower 3. By changing the size on the thickness]</li>
<li>[http://shapeupshoes.org/activity/p/18437/ cable production into the golden era]</li>
<li>[http://kongerkinu2.onehottie.com/blog/2012/10/10/and_volvo_v50._volvo_made_based_on_where_in_the_end and Volvo V50. Volvo made based on where in the end]</li>
</ul> |
| Unified diff of changes made by edit (edit_diff) | @@ -0,0 +1,11 @@
+<br> ,[http://www.ralph-laurendanmark.com ralph lauren]<tr> <td> <pre> <br> using acoustic emission condition monitoring of gearbox <br> </pre> </td> </tr> <br> <tr> <td> <pre > <br> emission occurs in the corresponding frequency of the output shaft fixed intervals,[http://www.abercrombiehamburg-fitch.com abercrombie hamburg]. Speed of 5s,[http://www.edhardyespana-es.net/para-mujer-ed-hardy-jerseys-mujer-tops-c-1_40.html ed hardy], the signal duration in the 15 ~ 25ms {speed between the 10s,[http://www.hollisterhamburg-de.org hollister hamburg], the duration between the 12 ~ 19ms,[http://www.ralph-laurendanmark.com ralph lauren outlet]. Duration of the delay due to tooth after impact,[http://www.mulberry-outletvaskor.net mulberry sverige], the leading surface and behind the gear face and ask when a certain vibration,[http://www.mulberry-outletkobenhavn.net/mulberry-outlet-c-7.html mulberry københavn]. This increased vibration in the case of backlash will be extended. In short,[http://www.hollister-milano.org hollister milano], the failure mode of failure and integrated so that the acoustic emission signals measured over the duration of tooth no longer wear. The reason may be that there is no tooth wear involute,[http://www.abercrombiedusseldorf-de.com abercrombie düsseldorf]. Tooth gap and because of worn tooth material increases, which increases the air with the teeth the same way as affecting acoustic emission,[http://www.abercrombiemunchende.net abercrombie münchen], [4 . Reliably detect a variety of brass and internal and external wall cracks, holes, pits, pits, uneven thickness defects and wear and tear ducts. Detection rate of 25 ~ 4Sin/rain, test piece diameter of 50 ~ 200ram, detection sensitivity is not inferior to the outer wall 10 wall thickness, <a href=, wall thickness of the wall is not inferior to 12.5, detection of wall thickness error of ± 0.08ram. System is particularly suitable for pipe production line quality monitoring, analysis, archiving and statistics. References 1 where secondary cloud. Conical cap Zhirong. Principle of magnetic flux leakage testing. Hefei University of Technology (Natural Science worn), 1994,3 (1) ,28-322FriedrichForster. NewresultsofNDTbytheMFLmethod. NDTI Ⅱ ternatio groan 1.1971,4 (4) i254-2593 ZHAO Kai-hua and so on. Electromagnetism. Version 2. Beijing; Higher Education Press, 1985. Receiving end date :1998 -05-25 (on the next 513 pages) should be based on equipment, film and intensifying screen choose the appropriate tube voltage and high exposure to transillumination. To get in line with blackness and image quality into account the technical requirements of the exposure sensitivity curve, and thus to select the exposure standard. 4 qualified negative of the conditions (1) No rinse and operation as well as pseudo-caused defects in the film itself, <a href=(2) marking and labeling is complete, as the quality indicator display correctly. (3) the effective assessment of the weld area should be in black-degree 1. O ~ 4.0. (4) image quality into account the sensitivity and image quality levels and the corresponding wall thickness. 5 Conclusion In recent years, the author studies and practical experience shows that the RT method in accordance with the above requirements of the implementation process and to detect cracks, incomplete penetration, slag and porosity defects image (image is distorted) in the film can be identified, only because the thickness of the base metal poor and the detection sensitivity is not very high. RT methods in view of the successful application of our plant, so trying this method as recommended RT T-fillet welds for quality review of the basic means. This article describes the implementation of the process according to its requirements, combined with the specific circumstances of our factory, we drafted a corporate standard WCGJ040601-94 ~ T-fuel boiler-ray weld inspection standards Board reviewed and get approved, <a href=Received Date: 1998 an O2-10 · 521 · <br> </pre> </td> </tr> <br><br>Related articles:<br> <ul><br> <br> <li> <a href=li><br> <br> <li> <a href=> </li><br> <br> <li> <a href = </Ul>
+Related articles：
+ <ul>
+
+ <li><a href="http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12" target="_blank">the lower 3. By changing the size on the thickness]</li>
+
+ <li>[http://shapeupshoes.org/activity/p/18437/ cable production into the golden era]</li>
+
+ <li>[http://kongerkinu2.onehottie.com/blog/2012/10/10/and_volvo_v50._volvo_made_based_on_where_in_the_end and Volvo V50. Volvo made based on where in the end]</li>
+
+ </ul> |
| New page size (new_size) | 4643 |
| Old page size (old_size) | 0 |
| Size change in edit (edit_delta) | 4643 |
| Lines added in edit (added_lines) | <br> ,[http://www.ralph-laurendanmark.com ralph lauren]<tr> <td> <pre> <br> using acoustic emission condition monitoring of gearbox <br> </pre> </td> </tr> <br> <tr> <td> <pre > <br> emission occurs in the corresponding frequency of the output shaft fixed intervals,[http://www.abercrombiehamburg-fitch.com abercrombie hamburg]. Speed of 5s,[http://www.edhardyespana-es.net/para-mujer-ed-hardy-jerseys-mujer-tops-c-1_40.html ed hardy], the signal duration in the 15 ~ 25ms {speed between the 10s,[http://www.hollisterhamburg-de.org hollister hamburg], the duration between the 12 ~ 19ms,[http://www.ralph-laurendanmark.com ralph lauren outlet]. Duration of the delay due to tooth after impact,[http://www.mulberry-outletvaskor.net mulberry sverige], the leading surface and behind the gear face and ask when a certain vibration,[http://www.mulberry-outletkobenhavn.net/mulberry-outlet-c-7.html mulberry københavn]. This increased vibration in the case of backlash will be extended. In short,[http://www.hollister-milano.org hollister milano], the failure mode of failure and integrated so that the acoustic emission signals measured over the duration of tooth no longer wear. The reason may be that there is no tooth wear involute,[http://www.abercrombiedusseldorf-de.com abercrombie düsseldorf]. Tooth gap and because of worn tooth material increases, which increases the air with the teeth the same way as affecting acoustic emission,[http://www.abercrombiemunchende.net abercrombie münchen], [4 . Reliably detect a variety of brass and internal and external wall cracks, holes, pits, pits, uneven thickness defects and wear and tear ducts. Detection rate of 25 ~ 4Sin/rain, test piece diameter of 50 ~ 200ram, detection sensitivity is not inferior to the outer wall 10 wall thickness, <a href=, wall thickness of the wall is not inferior to 12.5, detection of wall thickness error of ± 0.08ram. System is particularly suitable for pipe production line quality monitoring, analysis, archiving and statistics. References 1 where secondary cloud. Conical cap Zhirong. Principle of magnetic flux leakage testing. Hefei University of Technology (Natural Science worn), 1994,3 (1) ,28-322FriedrichForster. NewresultsofNDTbytheMFLmethod. NDTI Ⅱ ternatio groan 1.1971,4 (4) i254-2593 ZHAO Kai-hua and so on. Electromagnetism. Version 2. Beijing; Higher Education Press, 1985. Receiving end date :1998 -05-25 (on the next 513 pages) should be based on equipment, film and intensifying screen choose the appropriate tube voltage and high exposure to transillumination. To get in line with blackness and image quality into account the technical requirements of the exposure sensitivity curve, and thus to select the exposure standard. 4 qualified negative of the conditions (1) No rinse and operation as well as pseudo-caused defects in the film itself, <a href=(2) marking and labeling is complete, as the quality indicator display correctly. (3) the effective assessment of the weld area should be in black-degree 1. O ~ 4.0. (4) image quality into account the sensitivity and image quality levels and the corresponding wall thickness. 5 Conclusion In recent years, the author studies and practical experience shows that the RT method in accordance with the above requirements of the implementation process and to detect cracks, incomplete penetration, slag and porosity defects image (image is distorted) in the film can be identified, only because the thickness of the base metal poor and the detection sensitivity is not very high. RT methods in view of the successful application of our plant, so trying this method as recommended RT T-fillet welds for quality review of the basic means. This article describes the implementation of the process according to its requirements, combined with the specific circumstances of our factory, we drafted a corporate standard WCGJ040601-94 ~ T-fuel boiler-ray weld inspection standards Board reviewed and get approved, <a href=Received Date: 1998 an O2-10 · 521 · <br> </pre> </td> </tr> <br><br>Related articles:<br> <ul><br> <br> <li> <a href=li><br> <br> <li> <a href=> </li><br> <br> <li> <a href = </Ul>
Related articles：
<ul>
<li><a href="http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12" target="_blank">the lower 3. By changing the size on the thickness]</li>
<li>[http://shapeupshoes.org/activity/p/18437/ cable production into the golden era]</li>
<li>[http://kongerkinu2.onehottie.com/blog/2012/10/10/and_volvo_v50._volvo_made_based_on_where_in_the_end and Volvo V50. Volvo made based on where in the end]</li>
</ul>
|
| Lines removed in edit (removed_lines) | |
| All external links in the new text (all_links) | http://www.ralph-laurendanmark.com
http://shapeupshoes.org/activity/p/18437/
http://kongerkinu2.onehottie.com/blog/2012/10/10/and_volvo_v50._volvo_made_based_on_where_in_the_end
http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12
|
| Links in the page, before the edit (old_links) | |
| All external links added in the edit (added_links) | http://www.ralph-laurendanmark.com
http://shapeupshoes.org/activity/p/18437/
http://kongerkinu2.onehottie.com/blog/2012/10/10/and_volvo_v50._volvo_made_based_on_where_in_the_end
http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12
|
| All external links removed in the edit (removed_links) | |
| Parsed HTML source of the new revision (new_html) | <br /> ,<a href="http://www.ralph-laurendanmark.com" class="external text" rel="nofollow">ralph lauren</a><tr> <td> <pre> <br> using acoustic emission condition monitoring of gearbox <br> </pre> </td> </tr> <br /> <tr> <td> <pre> <br> emission occurs in the corresponding frequency of the output shaft fixed intervals,[http://www.abercrombiehamburg-fitch.com abercrombie hamburg]. Speed of 5s,[http://www.edhardyespana-es.net/para-mujer-ed-hardy-jerseys-mujer-tops-c-1_40.html ed hardy], the signal duration in the 15 ~ 25ms {speed between the 10s,[http://www.hollisterhamburg-de.org hollister hamburg], the duration between the 12 ~ 19ms,[http://www.ralph-laurendanmark.com ralph lauren outlet]. Duration of the delay due to tooth after impact,[http://www.mulberry-outletvaskor.net mulberry sverige], the leading surface and behind the gear face and ask when a certain vibration,[http://www.mulberry-outletkobenhavn.net/mulberry-outlet-c-7.html mulberry københavn]. This increased vibration in the case of backlash will be extended. In short,[http://www.hollister-milano.org hollister milano], the failure mode of failure and integrated so that the acoustic emission signals measured over the duration of tooth no longer wear. The reason may be that there is no tooth wear involute,[http://www.abercrombiedusseldorf-de.com abercrombie düsseldorf]. Tooth gap and because of worn tooth material increases, which increases the air with the teeth the same way as affecting acoustic emission,[http://www.abercrombiemunchende.net abercrombie münchen], [4 . Reliably detect a variety of brass and internal and external wall cracks, holes, pits, pits, uneven thickness defects and wear and tear ducts. Detection rate of 25 ~ 4Sin/rain, test piece diameter of 50 ~ 200ram, detection sensitivity is not inferior to the outer wall 10 wall thickness, <a href=, wall thickness of the wall is not inferior to 12.5, detection of wall thickness error of ± 0.08ram. System is particularly suitable for pipe production line quality monitoring, analysis, archiving and statistics. References 1 where secondary cloud. Conical cap Zhirong. Principle of magnetic flux leakage testing. Hefei University of Technology (Natural Science worn), 1994,3 (1) ,28-322FriedrichForster. NewresultsofNDTbytheMFLmethod. NDTI Ⅱ ternatio groan 1.1971,4 (4) i254-2593 ZHAO Kai-hua and so on. Electromagnetism. Version 2. Beijing; Higher Education Press, 1985. Receiving end date :1998 -05-25 (on the next 513 pages) should be based on equipment, film and intensifying screen choose the appropriate tube voltage and high exposure to transillumination. To get in line with blackness and image quality into account the technical requirements of the exposure sensitivity curve, and thus to select the exposure standard. 4 qualified negative of the conditions (1) No rinse and operation as well as pseudo-caused defects in the film itself, <a href=(2) marking and labeling is complete, as the quality indicator display correctly. (3) the effective assessment of the weld area should be in black-degree 1. O ~ 4.0. (4) image quality into account the sensitivity and image quality levels and the corresponding wall thickness. 5 Conclusion In recent years, the author studies and practical experience shows that the RT method in accordance with the above requirements of the implementation process and to detect cracks, incomplete penetration, slag and porosity defects image (image is distorted) in the film can be identified, only because the thickness of the base metal poor and the detection sensitivity is not very high. RT methods in view of the successful application of our plant, so trying this method as recommended RT T-fillet welds for quality review of the basic means. This article describes the implementation of the process according to its requirements, combined with the specific circumstances of our factory, we drafted a corporate standard WCGJ040601-94 ~ T-fuel boiler-ray weld inspection standards Board reviewed and get approved, <a href=Received Date: 1998 an O2-10 · 521 · <br> </pre> </td> </tr> <br /><br />Related articles:<br /> <ul><br /> <br /> <li> <a href=li><br /> <br /> <li> <a href=> </li><br /> <br /> <li> <a href = </ul>
<p>Related articles：
</p>
<ul>
<li><a href="<a href="http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12" class="external free" rel="nofollow">http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12</a>" target="_blank">the lower 3. By changing the size on the thickness]</li>
<li><a href="http://shapeupshoes.org/activity/p/18437/" class="external text" rel="nofollow">cable production into the golden era</a></li>
<li><a href="http://kongerkinu2.onehottie.com/blog/2012/10/10/and_volvo_v50._volvo_made_based_on_where_in_the_end" class="external text" rel="nofollow">and Volvo V50. Volvo made based on where in the end</a></li>
</ul>
|
| New page text, stripped of any markup (new_text) | ,ralph lauren<tr> <td> <br> using acoustic emission condition monitoring of gearbox <br> </td> </tr> <tr> <td> <br> emission occurs in the corresponding frequency of the output shaft fixed intervals,[http://www.abercrombiehamburg-fitch.com abercrombie hamburg]. Speed of 5s,[http://www.edhardyespana-es.net/para-mujer-ed-hardy-jerseys-mujer-tops-c-1_40.html ed hardy], the signal duration in the 15 ~ 25ms {speed between the 10s,[http://www.hollisterhamburg-de.org hollister hamburg], the duration between the 12 ~ 19ms,[http://www.ralph-laurendanmark.com ralph lauren outlet]. Duration of the delay due to tooth after impact,[http://www.mulberry-outletvaskor.net mulberry sverige], the leading surface and behind the gear face and ask when a certain vibration,[http://www.mulberry-outletkobenhavn.net/mulberry-outlet-c-7.html mulberry københavn]. This increased vibration in the case of backlash will be extended. In short,[http://www.hollister-milano.org hollister milano], the failure mode of failure and integrated so that the acoustic emission signals measured over the duration of tooth no longer wear. The reason may be that there is no tooth wear involute,[http://www.abercrombiedusseldorf-de.com abercrombie düsseldorf]. Tooth gap and because of worn tooth material increases, which increases the air with the teeth the same way as affecting acoustic emission,[http://www.abercrombiemunchende.net abercrombie münchen], [4 . Reliably detect a variety of brass and internal and external wall cracks, holes, pits, pits, uneven thickness defects and wear and tear ducts. Detection rate of 25 ~ 4Sin/rain, test piece diameter of 50 ~ 200ram, detection sensitivity is not inferior to the outer wall 10 wall thickness, <a href=, wall thickness of the wall is not inferior to 12.5, detection of wall thickness error of ± 0.08ram. System is particularly suitable for pipe production line quality monitoring, analysis, archiving and statistics. References 1 where secondary cloud. Conical cap Zhirong. Principle of magnetic flux leakage testing. Hefei University of Technology (Natural Science worn), 1994,3 (1) ,28-322FriedrichForster. NewresultsofNDTbytheMFLmethod. NDTI Ⅱ ternatio groan 1.1971,4 (4) i254-2593 ZHAO Kai-hua and so on. Electromagnetism. Version 2. Beijing; Higher Education Press, 1985. Receiving end date :1998 -05-25 (on the next 513 pages) should be based on equipment, film and intensifying screen choose the appropriate tube voltage and high exposure to transillumination. To get in line with blackness and image quality into account the technical requirements of the exposure sensitivity curve, and thus to select the exposure standard. 4 qualified negative of the conditions (1) No rinse and operation as well as pseudo-caused defects in the film itself, <a href=(2) marking and labeling is complete, as the quality indicator display correctly. (3) the effective assessment of the weld area should be in black-degree 1. O ~ 4.0. (4) image quality into account the sensitivity and image quality levels and the corresponding wall thickness. 5 Conclusion In recent years, the author studies and practical experience shows that the RT method in accordance with the above requirements of the implementation process and to detect cracks, incomplete penetration, slag and porosity defects image (image is distorted) in the film can be identified, only because the thickness of the base metal poor and the detection sensitivity is not very high. RT methods in view of the successful application of our plant, so trying this method as recommended RT T-fillet welds for quality review of the basic means. This article describes the implementation of the process according to its requirements, combined with the specific circumstances of our factory, we drafted a corporate standard WCGJ040601-94 ~ T-fuel boiler-ray weld inspection standards Board reviewed and get approved, <a href=Received Date: 1998 an O2-10 · 521 · <br> </td> </tr> Related articles: <a href=li> <a href=> <a href =
Related articles：
<a href="http://sns.gcoge.com/home.php?h=12&app=blog&id=75274&user_id=12" target="_blank">the lower 3. By changing the size on the thickness]
cable production into the golden era
and Volvo V50. Volvo made based on where in the end
|
| old_html | |
| old_text | |
| Unix timestamp of change (timestamp) | 1349886828 |
